United States
£ GBP
Portable but powerful, the Tascam Portacapture X8 is a high-resolution handheld PCM recorder. Featuring a 3.5-inch colour touchscreen for easy operation and readability in the field, the intuitive menu system allows for the quick selection of a variety of pre-set recording parameters for several different recording scenarios such as music, voice, podcasts, field recording or manual settings. A built-in mixer with audio processing options such as low-cut, filter compressor and noise gate adds a huge amount of versatility and flexibility.
The X8 can record with sample rates of up to 192khz and features 32-bit floating point resolution to ensure exceptional audio quality. 32-bit floating point resolution results in content with uncompromised audio quality even with low-level recordings. When editing the audio data later, you can increase the level without deteriorating the signal-to-noise ratio (S/N). This is particularly useful in field recording
The Portacapture has two detachable large-diaphragm condenser microphones that can be set in either an A-B or X-Y configuration. If you wish to use your own external microphone, the four locking XLR/TRS combo inputs capable of handling mic and line-level signals, as well as additional mini-jack inputs and outputs, allow for the connection of external microphones as well as cameras or other audio devices.
The Portacapture X8 is powered by 4 x AA batteries (included), which will last for approximately 11 hours when phantom power is not used.
3.5-inch colour touchscreen
High-quality audio with sampling rates up to 192 kHz and 32-bit floating-point resolution
Recording in either WAV or MP3 format
6 recording modes: manual, voice, podcast, music, field, ASMR
Multi-track recording of up to 8 tracks (6 tracks + stereo mix)
Built-in mixer with audio processing functions including compressor, limiter, low-cut filter and noise gate
Two detachable large-diaphragm condenser microphones (can be set for A-B or X-Y configuration)
Four mic/line inputs via XLR/TRS locking combo jacks
Phantom power (24V/ 48V) for each mic input individually
Camera/line output with selectable attenuation
Line input to monitor/record audio sent from a camera or comparable external device
Powered by 4x AA batteries (Alkaline, Ni-MH,lithium) or USB power. AC power can be supplied by the Tascam PS-P520U power adapter.
